The conventional approach to room treatment is often adopted without considering or being aware of the options I'm going to present here. The main key to getting it right is to consider the speakers and the room together as a system. Many of the ideas presented here are based on the work of Dr Earl Geddes, however, the opinions expressed are my own.
The conventional approach
In a typical dedicated or semi dedicated room, the conventional approach to room treatment usually involves the following:
- bass traps (typically removable)
- absorption panels for first reflections
While this approach can work quite well, an alternative is presented here which many will find more satisfying.
Considering speakers and the room together
Speakers and the room together form a system. The relationship between the two is critical. Conventional speakers are often designed for their on axis response, while neglecting the power response. As a result, the off axis output which is radiated to the room has a different response. The ambient sound is therefore coloured relative to the direct sound. For this reason, room treatment is often used to reduce the damage.
An alternative approach is to first start with speakers that are designed to interact with the room in a way which does not require damage control. Some options include:
- controlled directivity speakers with waveguides
- open baffle speakers with behaviour approaching constant directivity
- omnidirectional speakers which radiate evenly in all directions
- AI Audio loudspeakers or their Gedlee kit versions
- Linkwitz Orion or the Nao
- Linkwitz Pluto or B&O Beolab
If we start with any of these speakers, we no longer need to be concerned as much about reducing reflected sound in the same way. The sound radiated by the room now matches the character of the direct sound. So what are we trying to achieve now?
I suggest the following guidelines:
- high level of bass damping
- modest amounts of diffusion
- little if any absorbing panels
- careful speaker placement
Firstly, the room itself should provide a high level of damping in the bass range. Idealy this should include the entire envelope acting as a large bass trap. Installing multiple layers of plasterboard (drywall) joined with a flexible adhesive such as Liquid Nails will achieve this goal. If the existing structure is very solid and undamped (masonry/concrete), then false walls and ceiling is a good place to start.
When starting with a room with significant damping, the problem of room modes is much easier to deal with. In addition to starting with a well damped room, it's also advisable to place multiple bass sources in locations determined by measurement. Three bass sources will typically provide a good balance of price and performance.
Read more about the multi sub approach >
Broad band treatment
Most domestic rooms can be considered acoustically small. They require different treatment to large spaces such as a commercial theatre of concert venue. Unlike these venues, it's preferable in a home environment to retain as much reverberant energy as possible. As a result, we should start with diffusion. It's important to avoid placing diffusers too close to the listening positions. Nearfield placement results in poor performance. Ideal locations include the wall behind the speakers, ceiling and side walls.
Experimentation should be used with absorbing panels. When forced to sit with a wall close behind, it may be worthwhile placing absorbing panels on the wall. Idealy such panels should be as thick as possible and relatively dense to be effective over a broad range of frequencies. Panels that are too thin will only work at high frequencies.
Speaker placement
In nearly all cases, speakers should be given room to breathe. Firstly, the tweeter should be as close as possible to seated ear level. They should have at least one metre clearance behind and to side walls, but preferably more. In the case of omni speakers, Linkwitz recommends that they be placed wider and closer to the listener than open baffle speakers.
Read more about omni placement at Linkwitz lab >
Geddes loudspeakers have unique recommendations for toe in. Geddes recommends 45 degree toe in relative to the side walls. This means the axis of each speaker will cross in front of the listening position. As a result, the listening position will be off axis. This is discussed in an online discussion at DIY audio. View thread >
This recommendation may or may not apply to other speakers.
Conclusion
Ideally the decision to purchase speakers should be made while also considering room issues. If your room isn't a dedicated room and treament isn't an option, then it becomes even more important to choose speakers with a well behaved polar response. In this case especially, omni, open baffle and controlled directivity designs should be seriously considered.
More information is avaible in the white papers and scientific papers on the Harman International website >
No comments:
Post a Comment
All comments are moderated.