February 12, 2015
February 8, 2015
Premium passive crossover for PSE-144
This is the premium passive crossover for PSE-144. As you can see, it's a hand made crossover, assembled with great care.
Most speakers are made with PCB based crossovers which can be assembled in minutes. With this crossover, it takes a full day to build a small number of them.
1. First, boards are cut. Here we have used 18mm MDF. Edges and corners are sanded with a slight round over.
2. Holes are drilled. Most holes are for straps to tie down the components.
3. Painting. Boards. Two durable fine texture coats are applied to the raw MDF.
4. Terminal strips are screwed in place.
5. Wire links soldered.
6. Resistors are glued in place.
7. All caps and inductors are both glued and strapped to the board.
8. Boards are tested.
9. Glue is applied to fix wire runs in place. In case of a bumpy ride in transit, glue is also used to hold wire runs apart. Some runs are also glued in place where they run along the board. This is not shown here as the photo was taken prior to testing.
All up this is a slow process. A pair of these crossovers would take around 6 hours or more labour if not built as part of a larger run. On a PCB it would be a matter of minutes.
February 7, 2015
January 30, 2015
PSE-144 Feb pre order
We're now taking pre-orders for PSE-144. This is the next batch and the deadline is Feb 22. Production starts the following day and after this run, the price will go up around AUD $500 to cover recent cost increases.
Now is a really good time to buy, not only to avoid a price rise:
- Exchange rate: The Aussie dollar has dropped, (21% saving for US customers)
- Save 20% on shipping: We've consolidating packaging so that two horns fit in a single box
- No Paypal fees: We're covering your Paypal fees, saving you around $150 on your order (international customers)
To find out more, shoot me a message or sign up here for the Red Spade Audio newsletter
December 30, 2014
HTS-215
HTS-215 is a horn sub kit with dual 15" drivers.
It features:
- ultra low distortion
- 20 Hz extension with authority
- extreme high output
- minimal box vibration due to the dual opposed driver mounting
December 7, 2014
HE3 - an elegent valve friendly speaker
Here's a dilemma. How do you create a speakerthat meets all these goals:
- easy for a valve amplifier to drive (benign impedance load and high sensitivity)
- a slim and elegant design (tall and slender rather than wide and chunky)
- pleasing tonal balance with full bass and no emphasised regions to get a high sensitivity rating
- strong bass extension
Based on the questions I'm often asked, it's much harder than people realise. Often people don't realise the implications of each decision. If you want a slender box that isn't very big, with good bass extension, generally it's going to mean it won't achieve high sensitivity.Something has to give.
HE3 is my answer. First we start with a conventional dome tweeter with fairly high sensitivity and an exceptional midbass driver - Acoustic Elegance TD6M. Here we achieve 93 dB sensitivity which is quite reasonable. Many speakers claiming higher don't actually deliver it. This is a spec that is often inflated excessively. Even individual drivers rated at 99 dB in reality may only have 93 dB of useful sensitivity.
Now the key in this design is that the bass is active, with a side firing 10" woofer. Here we dispense with high sensitivity and use brute force with a built in amp that also features DSP. The added bonus is that we can use EQ in the room.
Prototype coming soon.
Subscribe to:
Posts (Atom)










